Curlin Pump Tubing. Moog Curlin Medical Painsmart IOD Epidular Infusion Pump CHD Medical Open the pump door and remove the blue "Tubing Guide Pin" from its receptacle Make sure the tubing rests in the notch in front of the pump door on the right
Moog Curlin 2000 Adepto Medical from adeptomed.com
Lift the tubing toward the yellow flow-stop to free the tubing from the pump - Squeeze YELLOW Flow-Stop between thumb and forefinger to allow fluid to flow through to end of tubing, then release
Moog Curlin 2000 Adepto Medical
Epidural administration set with non-vented bag spike, yellow striped tubing, 0.2 micron air-eliminating filter, slide clamp, and male luer with vented cap Stretch the tubing over the top of the pump aligning it into the tubing track Check tubing from pump to IV bag for cause, then correct obstruction per protocol
Epidural IV Pump Set Curlin® 90 Inch Tubing Without Port. Lift the tubing toward the yellow flow-stop to free the tubing from the pump Make sure the tubing rests in the notch in front of the pump door on the right
Epidural IV Pump Set Curlin® 90 Inch Tubing Without Port. Place the yellow flow-stop in where shown by the YELLOW arrow Check tubing from pump to IV bag for cause, then correct obstruction per protocol